Panasonic KV-S1028Y - Installing the Software

4.3 Installing the Software
• When turning on the unit's power for the first time, select the language used on the LCD by using the or
cursor buttons, and then press the OK button to complete your selection.
• You can change the language used on the LCD. For details, see "6.1.3 Changing the language used on
the LCD" (page 31).
• When turning on the unit's power for the first time, set the date and time by using the , , or
cursor buttons, and then press the OK button. For details, see "6.1.4 Changing the date and time" (page
31).
Notice
• Make sure to log on as an administrator to install the software.
• Use only the power cord and the USB cable that are provided with the unit.
The software on the enclosed Software / Manual CD-ROM can be installed on your computer.
You can select from the 2 installation methods below, depending on your needs.
a. Complete: Install all the drivers, applications, utilities and Operating Manual.
b. Custom: Install only selected items.
Note
• Normally, it is recommended to select [Complete].
4.3 Installing the Software
21