9 Clearing Paper Jams
Torn paper, thin paper or paper that is creased on the top edge may cause paper jams. If a paper jam
occurs, remove the jammed sheet according to the following procedure.
1. Remove all documents from the feed tray.
2. Open the ADF door (page 32).
3. Remove the jammed document.
• If the document is jammed in the feed tray area, pull it backwards as shown in the illustration.
• If the document is jammed in the exit area, pull it forward as shown in the illustration.
4. Close the ADF door (page 32).
Notice
• Close the ADF door after confirming that no documents remain inside the unit.
• A message is displayed on the screen in push scan. Please follow the instructions. Processing
can be selected from the following.
– Delete the scanned image and stop scanning.
9 Clearing Paper Jams
80
To Next Page
Loading...
