6.4.2 Output File
The output image file name is as follows.
Prefix
Item
delimiter
Type Code
Item
delimiter
Sequence
ID
*1
Dot Extension
1 to 15
characters
*2
1 character 1 character 1 character 5 characters 1 character 3 characters
Example
Panasonic_
DOC01
-
M
-
00001
.
jpg
*1
If a Factory Reset is performed on the unit, the Sequence ID applied to file names pushed to all destinations will also be reset.
Therefore, you should assign a different folder path from the existing one to prevent existing data from unexpectedly being
overwritten.
*2
Up to 31 characters if [Location] is selected. Up to 78 characters if [Combination] is selected.
Prefix
Type of prefix Number of characters Contents
Host Name 3 to 15
Set the value of "Network
Setting" in "IP Configuration"
(page 74).
Date and Time 14
The format set in [Date & Time]
(page 71).
• YYYYMMDDhhmmss
• MMDDYYYYhhmmss
• DDMMYYYYhhmmss
User-defined Field 1 to 15
Set the value on "File Name" of
"Scan Settings" (page 72).
Location 1 to 31
Set the value of "Network
Setting" in "IP Configuration"
(page 74).
Combination 1 to 78
The following contents can be
combined. Set the value of "File
Name" in "Scan Settings" (page
72).
• Host Name
• Date and Time
• User-defined Field
• Location
6.4.2 Output File
55
To Next Page
Loading...
