Panasonic KV-S1028Y - Performing USB Push Scan; Operating Scanner and Selecting Job

Scan documents
• Operate the scanner as follows.
Note
• If any documents are left in [Document List], Image Capture Plus cannot receive push scan data.
1. Press the Skip/Menu button (
) to select USB mode.
2. Use or of the cursor button to select a group, and use or to select a job.
• The Group name and the Job Setting name registered in [Scan Button Settings] are displayed.
3. Place the documents on the feed tray.
• When [Touch Free Scanning] is selected, scanning will start when documents are placed on the feed
tray.
• When [Single Touch Scanning] is selected, press the OK button or the Start/Stop button (
) to
start scanning.
6.4.3 USB mode
58