Scan documents
• If any documents are left in [Document List], Image Capture Plus cannot receive push scan data.
• Operate the scanner as follows.
1. Press the Skip/Menu button ( ) to select network PC mode.
2. Use or of the cursor button to select a computer.
• By pressing the OK button, you can check the IP address of the currently selected computer. By
pressing the OK button again, you can return to the original screen.
3. Use
or of the cursor button to select a job.
• You can select a job from the top 10 jobs in job settings list.
4. Place the documents on the feed tray.
5. Press the Start/Stop button ( ) to start scanning.
6.4.4 Network PC mode
60
To Next Page
Loading...
