To Next PageTo Next PageHow to improve the scan speed of my Panasonic KV-S1057C Scanner?
If the scan speed of your Panasonic Scanner is slow, it might be connected via USB 1.1. Connect the scanner over USB 2.0 or USB 3.0 to improve the scan speed.
Why does my Panasonic KV-S1057C Scanner have paper jams frequently?
Frequent paper jams in your Panasonic Scanner can be caused by several factors. Ensure that the document isn't wrinkled; smooth it out if it is. Dirty rollers can also cause jams, so clean them. Make sure the document is correctly aligned and that you haven't loaded too many sheets into the feed tray.
Why does my Panasonic KV-S1057C double feed frequently?
Double feeding in your Panasonic Scanner can occur for several reasons. The paper feed roller or double feed prevention roller may be worn down, requiring replacement. The double feed detectors could be dirty and need cleaning. Ensure the document is properly aligned and not curled or folded, which can cause uneven height on the right and left sides. Also, make sure you aren't using unsupported or overly thick paper. If so, copy the document onto compatible paper. Finally, avoid overloading the feed tray.
What to do if my computer does not recognize my Panasonic KV-S1057C Scanner?
If the computer doesn't recognize the Panasonic Scanner, ensure the USB cable is correctly connected directly to the computer, not through a USB hub. If the issue persists, verify you are using the included USB cable. The problem may also be caused by the software not being installed correctly. In this case, uninstall and then reinstall the software. Also, pressing the power button will turn ON the unit’s power if it was turned OFF because no operation was performed for a certain period of time.
Why is the scanning position shifted on my Panasonic Scanner?
If the scanning position is shifted, it may be because the scanning position has not been readjusted after replacing or re-assembling the CIS assembly or mechanical parts related to conveying documents or the CIS assembly is not installed properly. Re-assemble the CIS Assembly.
What to do if START/STOP, Skip, or Cursor buttons don't work on Panasonic KV-S1057C Scanner?
If the START/STOP, Skip, or Cursor buttons on your Panasonic Scanner aren't working correctly, it could be due to a mechanical problem with the ON/OFF switch. Check the contact between the button cover and the switch on the SW PANEL Board. Also, check the button’s mechanical condition. Re-attach the button cover after checking for damage. Replace any faulty parts.
How to troubleshoot noise issues with my Panasonic Scanner?
To troubleshoot noise issues with your scanner, consider the following: * There may be a problem with the Conveyor Motor. Replace the Conveyor Motor if you hear a strange sound. * There may be a problem with the Bearing of the Rollers. Replace the Bearing that has the strange sound. * There may be a problem with the Rollers. Replace the Rollers that have the strange sound. * There may be a problem with the Gears. Replace the Gears that have the strange sound.
What to do if my Panasonic Scanner does not recognize the USB connection?
If your scanner isn't recognizing the USB connection, here's what you can do: * Check the device (USB) condition of PC with Device Manager. * Re-attach the USB cable, and then restart the scanner and PC. * Try replacing the USB cable. For S1057C and S1027C models, check the soldering condition of parts and circuits on the CONTROL Board, including the USB IF connector, common mode filter, USB3.0 Device IC, and PCI Clock Driver. Replace the CONTROL Board if necessary. For SL1066, SL1056, SL1055, SL1036, and SL1035 models, inspect the soldering condition of parts and circuits on the CONTROL Board, focusing on the USB IF connector, common mode filter, and CPU. Replace the CONTROL Board if needed.
General| Film scanning | - |
|---|---|
| Color scanning | Yes |
| Input color depth | 24 bit |
| Maximum scan size | - mm |
| Output grayscale depth | 8 bit |
| Output monochrome depth | 1 bit |
| ADF scan speed (b/w, A4) | 65 ppm |
| Optical scanning resolution | 600 x 600 DPI |
| Duplex ADF scan speed (b/w, A4) | 130 ipm |
| Daily duty cycle (max) | - pages |
| Standard input capacity | 100 sheets |
| USB version | 3.2 Gen 1 (3.1 Gen 1) |
| Standard interfaces | USB 3.2 Gen 1 (3.1 Gen 1) |
| Power supply type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (off) | 0.5 W |
| Scanner type | ADF scanner |
| Product color | Black, White |
Weight and Dimensions| Depth | 256.5 mm |
|---|---|
| Width | 300 mm |
| Height | 238 mm |
| Weight | 3991 g |
Important safety instructions and warnings for using the scanner.
Step-by-step guide to installing the scanner software from the CD-ROM.
Physical setup instructions for the scanner hardware.
Guidelines for preparing documents before scanning.
List of document types that may cause scanning issues.
Step-by-step guide on loading and scanning documents.
Using scanner buttons to initiate scans without computer intervention.
Procedure for removing jammed paper from the scanner.
Procedure for cleaning internal scanner components.
Guideline and procedure for replacing scanner rollers.
Common scanner problems, their causes, and remedies.
Technical details and performance metrics of the scanner.
