Why is the scanned image skewed on my Panasonic KV-S1057C?
If your Panasonic Scanner produces a skewed image, it could be due to the document guides not being properly adjusted to the document size, or the document being set slanted on the feed tray. Adjust the document guides to fit the document size correctly. Also, if the document has curling or folding, flatten the document and reload it.
What to do if my Panasonic Scanner does not recognize the USB connection?
If your scanner isn't recognizing the USB connection, here's what you can do: * Check the device (USB) condition of PC with Device Manager. * Re-attach the USB cable, and then restart the scanner and PC. * Try replacing the USB cable. For S1057C and S1027C models, check the soldering condition of parts and circuits on the CONTROL Board, including the USB IF connector, common mode filter, USB3.0 Device IC, and PCI Clock Driver. Replace the CONTROL Board if necessary. For SL1066, SL1056, SL1055, SL1036, and SL1035 models, inspect the soldering condition of parts and circuits on the CONTROL Board, focusing on the USB IF connector, common mode filter, and CPU. Replace the CONTROL Board if needed.
How to troubleshoot noise issues with my Panasonic Scanner?
To troubleshoot noise issues with your scanner, consider the following: * There may be a problem with the Conveyor Motor. Replace the Conveyor Motor if you hear a strange sound. * There may be a problem with the Bearing of the Rollers. Replace the Bearing that has the strange sound. * There may be a problem with the Rollers. Replace the Rollers that have the strange sound. * There may be a problem with the Gears. Replace the Gears that have the strange sound.
What to do if START/STOP, Skip, or Cursor buttons don't work on Panasonic KV-S1057C Scanner?
If the START/STOP, Skip, or Cursor buttons on your Panasonic Scanner aren't working correctly, it could be due to a mechanical problem with the ON/OFF switch. Check the contact between the button cover and the switch on the SW PANEL Board. Also, check the button’s mechanical condition. Re-attach the button cover after checking for damage. Replace any faulty parts.
Why is the scanning position shifted on my Panasonic Scanner?
If the scanning position is shifted, it may be because the scanning position has not been readjusted after replacing or re-assembling the CIS assembly or mechanical parts related to conveying documents or the CIS assembly is not installed properly. Re-assemble the CIS Assembly.
What to do if my computer does not recognize my Panasonic KV-S1057C Scanner?
If the computer doesn't recognize the Panasonic Scanner, ensure the USB cable is correctly connected directly to the computer, not through a USB hub. If the issue persists, verify you are using the included USB cable. The problem may also be caused by the software not being installed correctly. In this case, uninstall and then reinstall the software. Also, pressing the power button will turn ON the unit’s power if it was turned OFF because no operation was performed for a certain period of time.
How to fix noise or wave patterns (moire pattern) on scanned images with Panasonic KV-S1057C?
If there is noise or wave patterns (moire pattern) on the scanned image from your Panasonic Scanner, it may be caused by the scanning resolution settings combined with patterns within the scanned image. Change the scanning resolution and perform scanning again.
What to do if the image for a scanned document is blank with my Panasonic Scanner?
If the image for a scanned document from your Panasonic Scanner is blank, it's possible the document was loaded upside down. Load the document correctly.
How to remove dark spots or noise on scanned documents using Panasonic KV-S1057C?
If dark spots or noise appear on scanned documents from your Panasonic Scanner, the scanning glasses are probably dirty. Clean the scanning glasses.
How to fix vertical streaks on scanned documents from Panasonic KV-S1057C?
If your Panasonic Scanner produces scanned images with vertical streaks, the scanning glasses are likely dirty. Clean the scanning glasses to resolve this issue.
General| Film scanning | - |
|---|---|
| Color scanning | Yes |
| Input color depth | 24 bit |
| Maximum scan size | - mm |
| Output grayscale depth | 8 bit |
| Output monochrome depth | 1 bit |
| ADF scan speed (b/w, A4) | 65 ppm |
| Optical scanning resolution | 600 x 600 DPI |
| Duplex ADF scan speed (b/w, A4) | 130 ipm |
| Daily duty cycle (max) | - pages |
| Standard input capacity | 100 sheets |
| USB version | 3.2 Gen 1 (3.1 Gen 1) |
| Standard interfaces | USB 3.2 Gen 1 (3.1 Gen 1) |
| Power supply type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (off) | 0.5 W |
| Scanner type | ADF scanner |
| Product color | Black, White |
Weight and Dimensions| Depth | 256.5 mm |
|---|---|
| Width | 300 mm |
| Height | 238 mm |
| Weight | 3991 g |
To Next Page
