11
9. Open the [Preset Scan] sub menu.
• You can register up to 30 settings in total. (3 groups, 10 settings for each group.)
10. Click to register a setting.
11. Register the scan settings as needed.
Output Settings
• Select [Email], [SMB], or [FTP] as the output method.
• If you use SMB or FTP, select an output path from the list you registered in the Server tab.
Scan Settings
• Select the setting from Scan Settings List.
• You can register the setting on this screen, too.
Note
• If you need to change the advanced settings, click in [Advanced Settings].
To Next Page
Loading...
