5
Scan documents
Operate the scanner as follows.
Note
• If any documents are left in [Document List], Image Capture Plus cannot receive push scan data.
1. Press the Skip/Menu button to select USB mode.
2. Use
◀
or
▶
of the cursor button to select a group, and use
▴
or
▾
to select a job.
• The Group name and the Job Setting name registered in [Scan Button Setting] are displayed.
3. Place the documents on the feed tray.
• When touch free scanning is selected, scanning will start when documents are placed on the feed tray.
• When Single Touch Scanning is selected, press the OK button or the Start/Stop button ( ) to start
scanning.
To Next Page
Loading...
