7
Scan documents
• If any documents are left in [Document List], Image Capture Plus cannot receive push scan data.
• Operate the scanner as follows.
1. Press the Skip/Menu button ( ) to select network PC mode.
2. Use
◀
or
▶
of the cursor button to select a computer.
Note
• By pressing the OK button, you can check the IP address of the currently selected computer. By pressing the
OK button again, you can return to the original screen.
3. Use
▴
or
▾
of the cursor button to select a job.
Note
• You can select a job from the top 10 jobs in job settings list.
4. Place the documents on the feed tray.
5. Press the Start/Stop button ( ) to start scanning.
To Next Page
Loading...
