Panasonic KV-S1058Y - Using Configuration Web; Launch Configuration Web

13
Using Configuration Web
Network settings for this unit can be configured using the web browser that was launched from Network Scanner
Select Tool.
Note
• Some settings can also be configured using the LCD on the unit.
• If you are using Internet Explorer 11 and "Display intranet sites in Compatibility View" is selected,
Configuration Web may be not displayed correctly.
Launch Configuration Web
1. Start Network Scanner Select Tool.
2. Select the desired scanner.
Note
• Select the check box of the network scanner you use for pull scan.
3. Click [Configuration Web].
• The web browser will launch.
Notice
• To use Configuration Web, except for the Information tab, your password is necessary. Set your password
when the password setting screen appears. For details about the password, refer to “Password
”.
• The User Name is [root].