Panasonic KV-S1058Y - Function Tab

16
Function tab
Set the basic functions and maintenance functions of the unit.
User Settings
Item
Contents
USB ID
Language
Sets the language used on the LCD and Configuration Web.
Sleep
Sets the time length before the unit enters sleep mode. (1 to 240
minutes)
Power Off
Sets the power auto-off function. (15 minutes to 72 hours)
LCD Contrast
Sets the LCD contrast. (5 levels)
Roller Cleaning Notification
Enables (On) or disables (Off) the settings.
Roller Replacement Notification
Glass Cleaning Notification
Select Counter
Selects whether the [Scan] counter or the [System] counter is displayed
on the LCD during scanning.
Date Format
Select a date format from YYYYMMDD, MMDDYYYY or DDMMYYYY.
Counter
Item
Contents
Scan
The number of documents scanned during the scanning process.
This counter is cleared each time you start scanning.
System
The number of documents scanned by the scanner since it was shipped
from the factory.
After clean Roller Counter
The number of documents scanned since clearing the counter after
cleaning the rollers. Clear after cleaning the rollers.
After Replace Roller Counter
The number of documents scanned since clearing the counter after
replacing the rollers. Clear after replacing the rollers.
Clean Roller Timing
You can change the number of documents scanned before the Roller
Cleaning Notification occurs, if necessary.
Replace Roller Timing
You can change the number of documents scanned before the Roller
Replacement Notification occurs, if necessary.
Date and Time
Item
Contents
Use the PC clock
If [Use the PC clock] is selected, the scanner will get the date and time
from the computer when you click [Submit].
After you click [Submit], the check box is cleared automatically.
Date
Select a value from the list.
Time
Select a value from the list.
Time Zone
Set your time zone.