Panasonic KV-S5055C - About Status Indicators; Error Indicator

About Status Indicators
The status
of the scanner is displayed by the ready indicator (A) and the error indicator (B), as shown in the
table below:
21
A Ready indicator
(Green)
B Error indicator
(Red)
Status
ON OFF Ready
ON Blinking (Slow, Long ON)
*1
Caution
*4
OFF ON Error
*4
Blinking (Slow, Long ON)
*1
OFF Sleep
Blinking (Slow, Long ON)
*1
Blinking (Slow, Long ON)
*1
Caution
*4
/ Sleep
Blinking (Slow, Short ON)
*2
OFF Standby
*5
Blinking (Slow, Short ON)
*2
Blinking (Slow, Long ON)
*1
Caution
*4
/ Standby
*5
Blinking (Fast)
*3
OFF Warming up
Blinking (2 times consecutively) OFF Double Feed Skip mode
*1
On for 1 second and off for 1 second.
*2
On for 1 second and off for 3 seconds.
*3
On for 0.25 seconds and off for 0.25 seconds.
*4
Check the status of the scanner using User Utility.
*5
The scanner will enter Standby mode when no operation is performed for 30 minutes, to save power.
To use the scanner again, restart it by pressing any one of the buttons for more than 1 second. The time period before the scanner
enters Standby mode can be configured in User Utility.
(The default setting varies depending on the country/area.)
16 Installation Manual
Installation