Panasonic KW8M - Page 52

KW8M Eco-POWER METER
43
◆Ratio of estimated demand
・It displays the ratio of estimated demand.
(Estimated demand:2.5kW, Demand setting value:5.0kW -> ratio of estimated demand is 50.0%.)
・It displays [－－－－] when demand setting value is set to ”0.00kW”, when the ratio is over 999.9%,
and for 1 minute after starting the demand span.
・[－－－－] is displayed until when the next demand span starts, when you change clock to before
demand span or to next demand span, or at power failure.
<Display of remaining time>
Remaining time to demand span is displayed at the bottom line with present demand, estimated
demand, and ratio of estimated demand. The remaining time is updated every 1 minute.
・Display
Elapse time 00 to 59 seconds 1m 00s to 10m 59s 11m 00s to 29m 59s
Remaining
time
30 minutes 29 to 20minutes 19 to 1minutes
Display
3 (1digit)
2 (1digit)
1 to 19 (2 digits)
After 1 second
Remaining time to
demand span
[DEMAND]
Lighting
Remaining
time
Elapse
Elapse