27
KX-FLB802CX/KX-FLB812CX/KX-FLB802CXS/KX-FLB812CXS
machines both before and after transmission of image signals.
Control signals at 300 bps FSK are: 1850 Hz...0, 1650Hz...1.
An example of a binary process in G3 communication is shown below.
Explanation of Signals
Control signals are comprised mainly of 8-bit identification signals and the data signals added to them. Data signals are
added to DIS and DCS signals.
Signal.....DIS (Digital Identification Signal)
Identification Signal Format.....00000001
Function:
Notifies the capacity of the receiving unit. The added data signals are as follows.
Signal.....DCS (Digital Command Signal)
Identification Signal Format.....X1000001
Example
(Some models do not support the following items.):
Bit No. DIS/DTC DCS
1 Transmitter --- T.2 operation
2 Receiver --- T.2 operation Receiver --- T.2 operation
3 T.2 IOC = 176 T.2 IOC = 176
4 Transmitter --- T.3 operation
5 Receiver --- T.3 operation Receiver --- T.3 operation
6 Reserved for future T.3 operation features
7 Reserved for future T.3 operation features.
8 Reserved for future T.3 operation features.
9 Transmitter --- T.4 operation
10 Receiver --- T.4 operation Receiver --- T.4 operation
To Next Page
Loading...
