Panasonic KX-FLB802CX

72
KX-FLB802CX/KX-FLB812CX/KX-FLB802CXS/KX-FLB812CXS
8 Installation Instructions
8.1. INSTALLATION
8.1.1. INSTALLATION SPACE
The space required to install the unit is shown below.
The dimensions given are necessary for the unit to operate efficiently.
Note:
• Avoid excessive heat or humidity.
• Use the unit within the following ranges of temperature and humidity.
• Ambient temperature: 10°C to 32.5°C
• Relative humidity: 20% to 80% (without condensation)
• Power cord length should be less than 5 meters (16.4 feet). Using a longer cord may reduce the voltage or cause malfunctions.
• Avoid direct sunlight.
• Do not install near devices which contain magnets or generate magnetic fields.
• Do not subject the unit to strong physical shock or vibration.
• Keep the unit clean. Dust accumulation can prevent the unit from functioning properly.
• To protect the unit from damage, hold both sides when you move it.
• Do not place the unit in an area where the paper tray may be obstructed (i.e., by a wall, etc.)
• Keep this surface ( ) away from walls etc. more than 50 mm (1 31/32”) to let the unit cool down.
8.1.2. DOCUMENT TRAY
8.1.3. OUTPUT TRAY
KX-FLB812 has 2 pieces of output tray and KX-FLB802 has 1 output tray pre-installed.
Note:
• Do not place the unit in an area where the output tray may be easily bumped into.
Insert the document tray (1) into the slot (2) on the unit.