77
KX-FLB802CX/KX-FLB812CX/KX-FLB802CXS/KX-FLB812CXS
Caution for the paper input tray
4.
Load the paper, print-side up (1).
Important:
• Push and lock the plate (2) in the paper input tray, if it is lifted.
• Make sure that the recording paper guides (1) are at the paper size
mark and the recording paper is under the paper limit mark (2). The
paper should not be over the snubbers.(3)
5.
Insert the paper input tray into the unit.
Note:
• If the paper is not loaded correctly, re-adjust the paper guides, or
the paper may jam.
• If the paper input tray dose not close, the plate in the paper input
tray may be lifted. Push the paper and check that the paper is flat in
the paper input tray.
• Do not drop the input tray.
• Hold the paper input tray with both hands when removing or install-
ing. The input tray weighs approximately 2 kg when the recording
paper is fully installed.
To Next Page
Loading...
