169
KX-FP215
15.4. Cleaning
15.4.1. Document feeder/recording paper
feeder/scanner glass cleaning
Clean the document feeder/recording paper feeder/scanner
glass when:
— Documents or recording paper frequently misfeed.
— Smudges or black/white lines appear on the original doc-
ument when sending or copying.
Important:
• Remove the recording paper, then remove the paper
tray beforehand, otherwise the paper may misfeed or
jam.
1. Disconnect the power cord and the telephone line cord.
2. Open the front cover ( ), push the green button ( ),
then open the back cover ( ).
3. Clean the document feeder rollers ( ) and rubber flap
( ) with a cloth moistened with isopropyl rubbing alco-
hol, and let all parts dry thoroughly. Clean the scanner
glass ( ) with a soft, dry cloth.
Caution:
• Do not use paper products, such as paper towels or
tissues.
4. Clean the recording paper feeder roller ( ) with a cloth
moistened with isopropyl rubbing alcohol, and let all parts
dry thoroughly.
5. Close the back cover securely by pushing down on the
dotted area at both ends ( ), then close the front cover
securely ( ).
6. Install the paper tray, then insert the recording paper gen-
tly.
(See Installing the Paper Tray (P.55) and Installing the
Recording Paper (P.56))
7. Connect the power cord and the telephone line cord.