Panasonic KX-FPG381

2. Preparation
24
For Fax Advantage assistance, call 1-800-435-7329.
2.7 Case 3: TEL ONLY
2.7.1 Your situation
You wish to use the fax machine and an
extension telephone in a different room. Most
incoming calls are phone calls and the fax
machine is seldom used for fax reception.
2.7.2 How to setup
1 Press {MENU}.
2 Press {#} then {0}{0}.
QUICK SETUP
PRESS SET
3 Press {SET}.
PRINT SETUP?
YES:SET/NO:STOP
4 Press {SET} again to print the Quick Setup
Guide.
L If you do not wish to print it, press
{STOP}.
5 Press {A} or {B} repeatedly to display the
following.
SELECT A SETUP
=TEL ONLY [±]
6 Press {SET}.
L The AUTO ANSWER indicator turns OFF.
7 Press {MENU}.
2.7.3 How to receive calls
You can receive a fax with the base unit, handset
or an extension telephone.
With the base unit
1 Press {DIGITAL SP-PHONE} to answer the
call.
2 When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {FAX/START}.
L The fax machine will start fax reception.
With the handset
1 Lift the handset and press {TALK} or {SP-
PHONE} to answer the call.
2 When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {*}{#}{9} (default fax activation
code) firmly.
L The fax machine will start fax reception.
L You can also press {FAX/START} on the
base unit.
Note:
L To receive fax documents using the handset,
you must set the remote fax activation to ON
(feature #41 on page 71) beforehand.
With an extension telephone
Important:
L Use a touch tone telephone as the
extension telephone.
1 When the extension telephone rings, lift the
handset of the extension telephone.
2 When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press *#9 (default fax activation code)
firmly.
3 Replace the handset.
{FAX/START}
{SET}
{A}{B}
{DIGITAL SP-PHONE}
OFF
{MENU}
{STOP}
{TALK}
{SP-PHONE}
0519_FPG381.book Page 24 Monday, May 19, 2003 6:46 PM