2. Preparation
30
For Fax Advantage assistance, call 1-800-435-7329.
Example: 10:15 PM (12 hour clock entry)
1. Press {1}{0} {1}{5}.
M:|08/D:10/Y:03
TIME: 10:15AM
2. Press {*} repeatedly to display “PM”.
M:|08/D:10/Y:03
TIME: 10:15PM
6 Press {SET}.
L The next feature will be displayed.
L If 3 beeps sound, the setting is not
correct. Start again from step 4.
7 Press {MENU} to exit the program.
Note:
L The date and time will be printed on each
page transmitted from your unit.
L The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
For Caller ID service users (page 40)
L Caller ID will reset the clock after the first ring
if the adjusted time is incorrect.
L If the time has not previously been set, Caller
ID will not adjust the clock.
L Caller ID will automatically adjust the clock
for daylight saving time.
2.13 Your logo
The logo can be your company, division or name.
1 Press {MENU}.
SYSTEM SETUP
PRESS NAVI.[()]
2 Press {<} or {>} repeatedly to display the
following.
YOUR LOGO
PRESS SET
3 Press {SET}.
L The cursor (|) will appear on the display.
LOGO=|
4 Enter up to 30 characters for your logo. See
the character table on page 30 for details.
5 Press {SET}.
L The next feature will be displayed.
6 Press {MENU} to exit the program.
Note:
L Your logo will be printed on each page
transmitted from your unit.
To select characters with the dialing button
Buttons Characters
{1} #&’ ()@ , – .
/1
{2} abcABC2
{3} def DEF3
{4} ghi GHI 4
{5} jklJKL5
{SET}
{MENU}
{STOP}
{<}{>}{A}{B}
0519_FPG381.book Page 30 Monday, May 19, 2003 6:46 PM
To Next Page
Loading...
