Panasonic KX-FPG381

3. Telephone
37
Note:
L To enter another character located on the
same dialing button, press {>} to move the
cursor to the next space.
To correct a mistake
1. Press {<} or {>} to move the cursor to the
incorrect character/number.
2. Press {HOLD/CLEAR}.
L To erase all of the digits, press and hold
{HOLD/CLEAR}.
3. Enter the correct character/number.
3.3.2 Using the base unit
L You can also send faxes using the navigator
directory (page 51).
1 Press {MENU} repeatedly to display
“DIRECTORY SET”.
2 Press {*}.
DIRECTORY
1ITEM
3 Enter up to 16 characters for a name (see
page 30 for instructions).
4 Press {SET}.
5 Enter up to 22 digits for the telephone
number.
6 Press {SET}.
L To program other items, repeat steps 3 to
6.
7 Press {MENU}.
Helpful hints:
L For your convenience, HELP-FAX (1-800-
435-7329) has been stored in the base unit
directory. If you cannot solve a problem, call
this number from the base unit (page 38). If
not needed, you can erase it (page 38).
L You can confirm the stored items by printing
the telephone number list (page 93).
Note:
L If “SPACE= 5 DIRS.” is displayed only 5
more items can be stored.
To correct a mistake
1. Press {<} or {>} to move the cursor to the
incorrect character/number.
2. Press {STOP}.
L To erase all of the digits, press and hold
{STOP}.
3. Enter the correct character/number.
3.4 Making a phone call
using the navigator
directory
Before using this feature, program the desired
names and telephone numbers into the
navigator directory (page 36, 37).
L Keep the front cover page open for button
locations.
3.4.1 Using the handset
Make sure the handset is not being used.
1 Press {<} or {>}.
2 Press {v} or {e} repeatedly to display the
desired item.
3 Press {TALK} or {SP-PHONE}.
L The unit will start dialing automatically.
To search for a name by initial
Example: “LISA”
1. Press {<} or {>}.
2. Press {v} or {e} to initiate the directory.
3. Press {5} repeatedly to display any name
with the initial “L” (see the character table,
page 36).
L To search for symbols (not letters or
numbers), press {1}.
4. Press {v} repeatedly to display “LISA”.
L To stop the search, press {OFF}.
L To dial the displayed number, press
{TALK} or {SP-PHONE}.
{0} 0 (Space)
{HOLD/
CLEAR}
Delete button
Buttons Characters
{MENU}
{<}{>}
{STOP}
{SET}
0519_FPG381.book Page 37 Monday, May 19, 2003 6:46 PM