EasyManua.ls Logo

Panasonic KX-FPG381

Panasonic KX-FPG381
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Telephone
47
If the paging party hangs up before you
answer the page, Incoming call will be
displayed. Press {TALK} or {SP-PHONE} to
take the transferred call.
3.15 Conference
A conference call allows two extensions to speak
together with an outside caller. While you are
talking with a caller, page the base unit or a
handset to start the conference call.
L Keep the front cover page open for button
locations.
3.15.1 Handset
1 During a phone call, press
{INTERCOM/TRANSFER}.
L IN USE will flash on the display and the
call will be put on hold.
2 To page the base unit, press {0}.
OR
To page another handset, enter its
extension number using a dialing button ({1}
to {8}).
3 When the paged party answers, press
{CONF/FUNCTION} on your handset to
make a conference call.
Example: Conference with the base unit
L You can switch to the speaker by pressing
{SP-PHONE}. To switch back to the
receiver, press {TALK}.
L To leave the conference, press {OFF}.
The other two parties can continue the
conversation.
3.15.2 Base unit
1 During an outside call, press
{LOCATOR/INTERCOM}.
L The call will be put on hold.
2 To page a handset, enter its extension
number using a dialing button ({1} to {8}).
3 When the paged party answers, press
{CONF} on the base unit to make a
conference call.
Example: Conference with handset 1
CONFERENCE
[01 ]
L To leave the conference, press {DIGITAL
SP-PHONE}. The other two parties can
continue the conversation.
During a conference call
L The phone call can be put on hold by
pressing {HOLD/CLEAR} on the handset or
{HOLD} on the base unit. Internal
communications between extensions are not
suspended. Only the person who placed the
call on hold can resume the full conference;
press {CONF/FUNCTION} on the handset or
{CONF} on the base unit.
L One more extension can join the conference
call (Call share feature, page 47).
3.16 Call share
This feature allows a handset or the base unit to
join the existing outside call.
L Keep the front cover page open for button
locations.
3.16.1 To join a conversation
(Call share feature)
2 additional extensions can join an existing
phone call, for a total of 4 people (including the
outside caller) taking part in the conference.
Handset:
Press {TALK} or {SP-PHONE}.
Base unit:
Press {DIGITAL SP-PHONE}.
During a transfer
L If you do not announce the transfer and
the paged party does not answer within 1
minute after you hang up, your extension
will ring and the transferred call will be
returned to you. If you still do not answer
the call within 4 minutes, the call will be
disconnected. You may answer the call
again by pressing {TALK}, {SP-PHONE}
or {DIGITAL SP-PHONE} at any time,
provided the transfer has not been
answered by another extension. When
answering the call again, you may also
transfer the caller into a mailbox (page
63).
0519_FPG381.book Page 47 Monday, May 19, 2003 6:46 PM

Table of Contents

Related product manuals