Panasonic KX-FPG381

8. Programmable Features
68
8 Progra mmable FeaturesFeatur es (Base Unit)
8.1 Base unit
programming
Helpful hints:
L To exit programming, press {MENU} any
time.
8.1.1 Programming basic
features
1 Press {MENU}.
2 Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L The current setting of the feature will be
displayed.
3 Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
4 Press {SET}.
L The setting you selected is set, and the
next feature will be displayed.
5 To exit programming, press {MENU}.
8.1.2 Programming advanced
features
1 Press {MENU}.
2 Press {<} or {>} repeatedly to display
“ADVANCE SETTINGS”.
3 Press {SET}.
4 Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L The current setting of the feature will be
displayed.
5 Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
6 Press {SET}.
L The setting you selected is set, and the
next feature will be displayed.
7 To exit programming, press {MENU}.
Programming by entering the program
code number directly
You can select a feature by directly entering the
program code (# and a 2-digit number) instead of
using {<} or {>}.
1. Press {MENU}.
2. Press {#} and the 2-digit code number
(page 68 to page 73).
3. Press {A} or {B} repeatedly to display the
desired setting.
4. Press {SET}.
5. To exit programming, press {MENU}.
8.2 Basic features
Code #00: Setting the Quick Setup
QUICK SETUP
PRESS SET
See page 21 for details.
Code #01: Setting the date and time
SETDATE&TIME
PRESS SET
See page 29 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 30 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 32 for details.
Code #04: Printing a sending report
SENDING REPORT
MODE=ERROR [±]
To print a sending report for fax transmission
results (page 51).
{SET}{MENU}
{<}{>}{A}{B}
0519_FPG381.book Page 68 Monday, May 19, 2003 6:46 PM