4.6.2.1 Call Features
Display Name
Description Specifies the name to display as the caller on the other party’s phone
when you make a call.
Value Range Max. 24 characters
Note
• You can use Unicode characters for this setting.
Default Value Not stored.
Configuration File Reference DISPLAY_NAME_n
Voice Mail Access Number
Description Specifies the phone number used to access the voice mail server.
Note
• Your phone system must support voice mail.
Value Range Max. 32 characters
Default Value Not stored.
Configuration File Reference VM_NUMBER_n
Enable Anonymous Call
Description Selects whether to make calls without transmitting the phone number
to the called party.
4.6.2 Call Control [Line 1]–[Line n]
Document Version: 2017-07 Administrator Guide 137
To Next Page
Loading...
