4.5.3.1 RTP
RTP Packet Time
Description Selects the interval, in milliseconds, between transmissions of RTP
packets.
Value Range
• 20
• 30
• 40
• 60
Default Value 20
Configuration File Reference RTP_PTIME
Minimum RTP Port Number
Description Specifies the lowest port number that the unit will use for RTP
packets.
Value Range 1024–59598 (even number only)
Default Value 16000
Configuration File Reference RTP_PORT_MIN
Maximum RTP Port Number
Description Specifies the highest port number that the unit will use for RTP
packets.
Value Range 1424–59998 (even number only)
Default Value 20000
Configuration File Reference RTP_PORT_MAX
Telephone-event Payload Type
Description Specifies the RFC 2833 payload type for DTMF tones.
Note
• This setting is available only when [DTMF Type] is set to
[RFC2833].
Value Range 96–127
Default Value 101
Configuration File Reference TELEVENT_PAYLOAD
4.5.3.2 Voice Quality Report
Server Address
Description Specifies the IP address or FQDN of the collector server.
Value Range Max. 256 characters
4.5.3 VoIP Settings
124 Administrator Guide Document Version: 2017-07
To Next Page
Loading...
