Panasonic KX-HDV230 - RTP;RTCP;RTCP-XR Settings

Value Range -46–0
Default Value -5
DTMF_SIGNAL_LEN
Value Format INTEGER
Description Specifies the length of the DTMF signal, in milliseconds.
Value Range 60–200
Default Value 180
DTMF_INTDIGIT_TIM
Value Format INTEGER
Description Specifies the interval, in milliseconds, between DTMF signals.
Value Range 60–200
Default Value 90
5.3.26 RTP/RTCP/RTCP-XR Settings
DSCP_RTP_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format INTEGER
Description Specifies the DSCP level of DiffServ applied to RTP packets.
Value Range 0–63
Default Value 0
Web User Interface Reference RTP Packet QoS (DSCP)
DSCP_RTCP_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format INTEGER
Description Specifies the DSCP level of DiffServ applied to RTCP/RTCP-XR
packets.
Value Range 0–63
Default Value 0
Web User Interface Reference RTCP Packet QoS (DSCP)
MAX_DELAY_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format INTEGER
Description Specifies the maximum delay, in 10-millisecond units, of the jitter
buffer.
5.3.26 RTP/RTCP/RTCP-XR Settings
296 Administrator Guide Document Version: 2017-07