Panasonic KX-HDV230 - System; Language Settings

Value Range 1-65535
Default Value 9000
Configuration File Reference TWAMP_TEST_PORT
Wait Time for Control
Description Specifies the time, in seconds, for the TWAMP server to wait for
incoming packets for maintaining the session.
Value Range 1-65535
Default Value 900
Configuration File Reference TWAMP_SERVER_WAIT_TIME
Wait Time for Reflector
Description Specifies the time, in seconds, for the TWAMP reflector to wait for
incoming packets for maintaining the session.
Value Range 1-65535
Default Value 900
Configuration File Reference TWAMP_REFLECTOR_WAIT_TIME
4.4 System
This section provides detailed descriptions about all the settings classified under the [System] tab.
4.4.1 Language Settings
This screen allows you to select the language used for the Web user interface. The language setting is only
applicable when you log in to the Web user interface as User.
Note
• If you change the language while logged in to the Web user interface with the User account, the
language will be changed after the message "Complete" is displayed. If you are logged in with the
Administrator account, the language will be changed when a user logs in to the Web user interface as
User.
• The language used for the Web user interface for the Administrator account is always English.
• The language used for the unit remains unchanged even if the language for the Web user interface is
changed.
4.4 System
Document Version: 2017-07 Administrator Guide 97