4.3.5.1 Multicast Paging
IPv4 Address (Group 1–5)
Description Specifies the address for multi-cast paging for each channel group.
{Priority: Group 5 > Group 4 > Group 3, Group2, Group1 (depending
on the configuration)}
Value Range 224.0.0.0–239.255.255.255
Default Value Not stored.
Configuration File Reference MPAGE_ADDRm
IPv6 Address (Group 1–5)
Description Specifies the IPv6 address for multi-cast paging for each channel
group. {Priority: Group 5 > Group 4 > Group 3, Group2, Group1
(depending on the configuration)}
Value Range FF00::/8
Default Value Not stored.
Configuration File Reference MPAGE_IPV6_ADDRm
Port (Group 1–5)
Description Specifies the port number for multi-cast paging for each channel
group.
Value Range 0–65535
0: Disable
Default Value 0
Configuration File Reference MPAGE_PORTm
Priority (Group 1–3)
Description Selects the priority of the low priority channel group.
The priority of multi-cast paging group1-3 is lower than the talking.
Priority 4 is higher than Priority 5.
Value Range 4, 5
Default Value 5
Configuration File Reference MPAGE_PRIORITYm
Label (Group 1–5)
Description Specifies a label for each channel group.
Value Range Max. 24 characters
Default Value Not stored.
Configuration File Reference MPAGE_LABELm
Enable Transmission (Group 1–5)
Description Selects the sending multi-cast paging.
4.3.5 Multicast Paging Settings
Document Version: 2017-07 Administrator Guide 79
To Next Page
Loading...
