4.6.6 Tone Settings
This screen allows you to configure the dual-tone frequencies and ringtone patterns of each tone.
4.6.6.1 Dial Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of dial tones using 2
whole numbers separated by a comma.
Value Range 0, 200–2000 (0: No tone)
Note
• If the value for this setting is "350,440", the unit will use a
mixed signal of a 350 Hz tone and a 440 Hz tone.
Default Value 350,440
Configuration File Reference DIAL_TONE1_FRQ
4.6.6 Tone Settings
146 Administrator Guide Document Version: 2017-07
To Next Page
Loading...
