Panasonic KX-HDV230 - TWAMP Settings

Default Value
N
5.3.39 TWAMP Settings
TWAMP_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable the TWAMP server function.
Value Range Y: Enable the TWAMP server function.
N: Disable
Default Value
N
Web User Interface Reference Enable TWAMP
TWAMP_CONTROL_PORT
Value Format INTEGER
Description Specifies the port for the TWAMP control session.
Value Range 1-65535
Default Value 862
Web User Interface Reference Control Port
TWAMP_TEST_PORT
Value Format INTEGER
Description Specifies the port for the TWAMP test session.
Value Range 1-65535
Default Value 9000
Web User Interface Reference Test Port
TWAMP_SERVER_WAIT_TIME
Value Format INTEGER
Description Specifies the time, in seconds, for the TWAMP server to wait for
incoming packets for maintaining the session.
Value Range 1-65535
Default Value 900
Web User Interface Reference Wait Time for Control
TWAMP_REFLECTOR_WAIT_TIME
Value Format INTEGER
Description Specifies the time, in seconds, for the TWAMP reflector to wait for
incoming packets for maintaining the session.
Value Range 1-65535
Default Value 900
5.3.39 TWAMP Settings
354 Administrator Guide Document Version: 2017-07