Panasonic KX-HDV230 - Enable Shared Call

Enable Call Forwarding Busy
Description Selects whether to forward incoming calls to a specified destination
when the line is in use.
Value Range
• Yes
• No
Default Value No
Forwarding Number (Busy)
Description Specifies the phone number of the destination to forward calls to
when the line is in use.
Value Range Max. 32 characters
Default Value Not stored.
Enable Call Forwarding No Answer
Description Selects whether to forward incoming calls to a specified destination
when a call is not answered after it has rung a specified number of
times.
Value Range
• Yes
• No
Default Value No
Forwarding Number (No Answer)
Description Specifies the phone number of the destination to forward calls to
when a call is not answered after it has rung a specified number of
times.
Value Range Max. 32 characters
Default Value Not stored.
Ring Counts (No Answer)
Description Specifies the number of times that an incoming call rings until the call
is forwarded.
Value Range 0, 2–20
Default Value 3
Enable Shared Call
Description Selects whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
• Availability depends on your phone system.
4.6.2 Call Control [Line 1]–[Line n]
Document Version: 2017-07 Administrator Guide 139