Panasonic KX-HDV230 - Page 18

Configuring Settings from the Unit
KX-HDV130/KX-HDV230
To open the unit’s Web port
[In standby mode]
1.
2.
[ ]/[ ]: "Basic Settings" →
OK
3.
[ ]/[ ]: "Other Option" →
OK
4.
[ ]/[ ]: "Embedded Web" →
OK
5.
[ ]/[ ]: "On" for "Embedded Web" →
OK
To close the unit’s Web port
[In standby mode]
1.
2.
[ ]/[ ]: "Basic Settings" →
OK
3.
[ ]/[ ]: "Other Option" →
OK
4.
[ ]/[ ]: "Embedded Web" →
OK
5.
[ ]/[ ]: "Off" for "Embedded Web" →
OK
Note
The "Embedded Web" settings can also be configured with the following procedure.
Press the
button when the unit is in standby mode.
1.
[
]/[ ]: "System Settings" →
OK
2.
[ ]/[ ]: "Network Settings" →
OK
3.
[ ]/[ ]: "Embedded Web" →
OK
KX-HDV330/KX-HDV430
To open the unit’s Web port
[In standby mode]
1.
Tap
/ → "Basic Settings"
2.
Tap / → "Other Option"
3.
Tap "Embedded Web"
4.
Select "On" → "OK"
To close the unit’s Web port
[In standby mode]
1.
Tap
/ → "Basic Settings"
2.
Tap / → "Other Option"
3.
Tap "Embedded Web"
4.
Select "Off" → "OK"
1.1.6 Web User Interface Programming
18 Administrator Guide Document Version: 2017-07