ANNEX_G_STUN_MIN_KEEP_ALIVE
Value Format INTEGER
Description Specifies the minimum period, in seconds, that STUN Binding
Requests can be sent by the CPE for the purpose of maintaining the
binding in the Gateway. This limit applies only to Binding Requests
sent from the UDP Connection Request address and port, and only
those that do not contain the BINDING-CHANGE attribute.
Note
• This setting is available only when "ANNEX_G_STUN_ENABLE"
is set to "Y".
Value Range 1–3600
Default Value 30
UDP_CON_REQ_ADDR_NOTIFY_LIMIT
Value Format INTEGER
Description Specifies the minimum time, in seconds, between Active Notifications
resulting from changes to the "UDPConnectionRequestAddress" (if
Active Notification is enabled).
Value Range 0–65535
Default Value 0
DEVICE_PROVISIONING_CODE
Value Format STRING
Description Specifies the device provisioning code for use with TR-106
parameters.
Value Range Max. 64 characters
Default Value Empty string
TR069_REGISTERING
Value Format STRING
Description Specifies the line status that TR-069 outputs while the line is being
registered.
Value Range Max.16 characters
Default Value Error
TR069_REGISTERED
Value Format STRING
Description Specifies the line status that TR-069 outputs when the line has been
registered.
Value Range Max.16 characters
Default Value Registering
5.3.9 TR-069 Settings
Document Version: 2017-07 Administrator Guide 231
To Next Page
Loading...
