Panasonic KX-HDV230 - Page 268

PHONE_NUMBER_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format STRING
Description Specifies the phone number to use as the user ID required for
registration to the SIP registrar server.
Note
• When registering using a user ID that is not a phone number,
you should use the "SIP_URI_n" setting.
Value Range Max. 32 characters
Default Value Empty string
Web User Interface Reference Phone Number
SIP_URI_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format STRING
Description Specifies the unique ID used by the SIP registrar server, which
consists of "sip:", a user part, the "@" symbol, and a host part, for
example, "sip:user@example.com", "2405551111_1".
Note
• When registering using a user ID that is not a phone number,
you should use this setting.
• In a SIP URI, the user part ("user" in the example above) can
contain up to 63 characters, and the host part ("example.com"
in the example above) can contain up to 316 characters.
Value Range Max. 384 characters
Default Value Empty string
Web User Interface Reference SIP URI
SIP_RGSTR_ADDR_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format STRING
Description Specifies the IP address or FQDN of the SIP registrar server.
Value Range Max. 256 characters
Default Value Empty string
Web User Interface Reference Registrar Server Address
SIP_RGSTR_PORT_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format INTEGER
5.3.22 SIP Settings
268 Administrator Guide Document Version: 2017-07