Panasonic KX-HDV230 - Page 277

Description Specifies whether to add the option tag 100rel to the "Supported"
header of the INVITE message. For details, refer to RFC 3262.
Value Range
• Y: Enable 100rel function
• N: Disable 100rel function
Note
• If set to "Y", the Reliability of Provisional Responses function
will be enabled. The option tag 100rel will be added to the
"Supported" header of the INVITE message and to the
"Require" header of the "1xx" provisional message.
• If set to "N", the option tag 100rel will not be used.
Default Value
Y
Web User Interface Reference Enable 100rel (RFC 3262)
SIP_18X_RTX_INTVL_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format INTEGER
Description Specifies the retransmission interval, in seconds, for "18x" responses.
Value Range 0, 1–600 (0: Disable)
Default Value 0
SIP_SUBS_EXPIRE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format INTEGER
Description Specifies the length of time, in seconds, that the subscription remains
valid. This value is set in the "Expires" header of the SUBSCRIBE
request.
Value Range 1–4294967295
Default Value 3600
SUB_INTERVAL_RATE_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
Value Format INTEGER
Description Specifies the percentage of the "expires" value after which to refresh
subscriptions by sending a new SUBSCRIBE message in the same
dialog.
Value Range 1–100
Default Value 50
SUB_RTX_INTVL_n
For details about parameter names end with "_n", see 5.2.1 Configuration File Parameters
5.3.22 SIP Settings
Document Version: 2017-07 Administrator Guide 277