Panasonic KX-HDV230 - Page 322

Default Value 350,440
Web User Interface Reference Tone Frequencies
DIAL_TONE4_GAIN
Value Format INTEGER
Description Specifies the gain, in decibels, of Dial Tone 4 (stutter-type dial tone).
Value Range -24–24 (dB)
Default Value 0
DIAL_TONE4_RPT
Value Format INTEGER
Description Specifies whether Dial Tone 4 (stutter-type dial tone) is repeated.
Value Range 0–1
– 0: No Repeat
– 1: Repeat
Default Value 0
DIAL_TONE4_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of Dial Tone 4 (stutter dial
tones) to notify that a voice mail is waiting, using up to 22 whole
numbers (off 1, on 1, off 2, on 2…) separated by commas.
Note
• It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (msec) (0: Continuous)
Note
• Avoid setting 1–50 for any of the values.
Default Value 560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0
Web User Interface Reference Tone Timings
BUSY_TONE_FRQ
Value Format Comma-separated Integer
Description Specifies the dual-tone frequencies, in hertz, of busy tones using 2
whole numbers separated by a comma.
Value Range 0, 200–2000 (Hz) (0: No tone)
Default Value 480,620
Web User Interface Reference Tone Frequencies
5.3.33 Tone Settings
322 Administrator Guide Document Version: 2017-07