Description Specifies the display icon of soft key B during a call.
Value Range
• 0: Original
• 1: Line
• 2: Menu
• 3: Blind (Used when performing Blind Transfer)
• 4: Flash/Recall
• 5: Incoming Log
• 6: Outgoing Log
• 7: Phonebook
• 8: Park (Used when performing Call Park)
• 9: Pause
• 10: Private Hold
Note
The following features are applied to the soft key only when the
corresponding parameters are enabled. Otherwise, the soft key
will remain in its original setting.
– Blind: BLIND_TRANSFER_ENABLE
– Park: CALLPARK_KEY_ENABLE
– Pause: PAUSE_INPUT_ENABLE
– Private Hold: PRIVATE_HOLD_ENABLE
Default Value 0
TALKING_SOFT_KEY_C (For KX-HDV130/KX-HDV230)
Value Format INTEGER
Description Specifies the display icon of soft key C during a call.
5.3.34 Call Control Settings
Document Version: 2017-07 Administrator Guide 341
To Next Page
Loading...
