Panasonic KX-HTS824 - 2.1 Basic System Construction

Operation
Dial the following feature numbers from the Manager extension. Feature numbers are specified in 2.2.4 PBX
Configuration—[1-4] System—Numbering Plan in the Programming Item List.
When dialing is complete and the settings are changed, the call will be disconnected after the confirmation
tone is heard.
[Programming by dial]
Function Name
Feature
Number
(Default)
Parameter References
OGM Record / Clear /
Playback
*36 [0: Clear] [DISA floating extension
number]
3.12.4 Outgoing Message
(OGM)
[1: Record] [DISA floating extension
number]
[2: Playback] [DISA floating
extension number]
Time Service (Day /
Lunch / Night) Switch
*780 [0: Day] 3.12.1 Time Service
[1: Night]
[2: Lunch]
[#: Confirm the current Time
Service]
Door Open *55 [Doorphone Port No.] 3.11.2 Door Open
System Setting *# Trunk Attribution
[System PIN
*1
] [#] [400] [#] [Trunk
line number] [#] [N] [#]
Note
[N] = [0]: No Connect
[N] = [1]: Analog
Programming Item List
2.4.1 PBX Configuration
—[3-1] Trunk—Port—
Main—Attribution
Trunk Dialing Mode
[System PIN
*1
] [#] [410] [#] [Trunk
line number] [#] [N] [#]
Note
[N] = [0]: DTMF
[N] = [1]: Pulse
Programming Item List
2.4.1 PBX Configuration
—[3-1] Trunk—Port-
Analog - Basic—Dialing
Mode
HTTPS Port
[System PIN
*1
] [#] [196] [#] [N] [#]
Note
[N] = [0]: Close
[N] = [1]: Open
Programming Item List
4.2.1 Maintenance—[1-1]
Management—Web
Programming-Web
Programming-HTTPs
Enable
*1
The System PIN is specified in 4.2.1 Maintenance—[1-1] Management—Web Programming―System PIN for Manager in the
Programming Item List.
PIL Reference
2.2.4 PBX Configuration—[1-4] System—Numbering Plan
2.1.2 Programming by Dial for Manager
16 Feature Manual