PC Programming Manual References
3.24 [1-1] Slot—Port Property - Extension Port— Connection
3.30 [1-1] Slot—Port Property - LCO Port— Connection
3.33 [1-1] Slot—Port Property - BRI Port— Connection
3.35 [1-1] Slot—Port Property - PRI Port— Connection
3.38 [1-1] Slot—Port Property - T1 Port— Connection
3.44 [1-1] Slot—Port Property - E1 Port— Connection
3.47 [1-1] Slot—Port Property - EM Port— Connection
3.50 [1-1] Slot—Port Property - DID Port— Connection
3.53 [1-1] Slot—Port Property - IP-GW Port— Connection
3.57 [1-1] Slot—Port Property - IP-Extension Port— Connection
4.9 [2-6-1] Numbering Plan—Main—Features
→ Idle Line Access (Local Access)
→ Trunk Group Access
→ Single CO Line Access
4.13 [2-7-2] Class of Service—External Call Block
5.1 [3-1-1] Trunk Group—TRG Settings—Main— Line Hunting Order
5.2 [3-1-2] Trunk Group—Local Access Priority
6.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Parameter Selection (for Single CO)
→ Parameter Selection (for Group CO)
6.13 [4-2-3] Portable Station—Flexible Button
→ Type
→ Parameter Selection (for Single CO)
→ Parameter Selection (for Group CO)
6.17 [4-3] DSS Console
→ Type
→ Parameter Selection (for Single CO)
→ Parameter Selection (for Group CO)
10.1 [8-1] System Setting— ARS Mode
12.1 [10-1] CO Line Settings— CO Name
PT Programming Manual References
[400] LCOT/BRI Trunk Connection
[401] LCOT/BRI Trunk Name
[409] LCOT/BRI Trunk Number Reference
[500] Trunk Group Number
Feature Guide References
1.20.2 Flexible Buttons
2.2.1 Class of Service (COS)
User Manual References
1.2.1 Basic Calling
Feature Guide 101
1.5.5 Seizing a Line Features
To Next Page
Loading...
