The dial tone type for the ARS feature can be selected separately. If "Type A" is selected for the ARS,
dial tone 1A will be heard. If "Type B" is selected, dial tone 1B will be heard.
• Distinctive dial tones can be disabled. When disabled, dial tone 1 will be heard in all cases except those
marked with "*1" in the table above.
• Dial Tone Patterns
All dial tone patterns have a default (® 3.2.1 Tones/Ring Tones).
• Only dial tone 1 is sent to the extensions in the VM (DPT/DTMF) group. (® 1.24.1 Voice Mail (VM)
Group)
PC Programming Manual References
4.18 [2-9] System Options—Option 3
→
Dial Tone—Distinctive Dial Tone
→ Dial Tone—Dial Tone for Extension
→ Dial Tone—Dial Tone for ARS
320 Feature Guide
1.29.1 Dial Tone
To Next Page
Loading...
