Panasonic KX-NCP500 Features Guide

2.3.8 Software Upgrading
Description
It is possible to upload software from a PC to the PBX to upgrade the following:
Data File Storage Area
Main Processing (IPCMPR/IPCEMPR)
software data
Operating system data area on IPCMPR/IPCEMPR card.
Default data of system programming for
each country/area
Country/area data area on the IPCMPR/IPCEMPR card.
Language data for PT display Each language data area on the IPCMPR/IPCEMPR card.
There are two types:
Type 1: PT display except for PT system programming (®
2.3.2 PT Programming) (5 languages max.)
Type
2:
PT system programming data (one language max.)
LPR (software on a slot card) software data Flash ROM on the slot card (e.g., BRI8)
Cell Station (CS) software data Flash ROM on the CS
Conditions
• The software version of the IPCMPR/IPCEMPR can be confirmed through system programming.
Installation Manual References
KX-TDE100/KX-TDE200
3.3.1 IPCMPR Card
KX-TDE600
3.3.1 IPCEMPR Card
PC Programming Manual References
3.2 [1-1] Slot—Summary—
Card Type
PT Programming Manual References
[190] Main Processing (MPR) Software Version Reference
434 Feature Guide
2.3.8 Software Upgrading

Panasonic KX-NCP500 Specifications

General

VoIP Support	Yes
Operating System	Proprietary
Type	Hybrid IP-PBX
VoIP Codecs	G.711, G.729A
Protocols	SIP, H.323
Operating Temperature	0°C to 40°C
Analog Extensions	Yes
IP Extensions	Yes
Power Supply	AC 100-240 V, 50/60 Hz
SIP Trunks	Yes
Wireless (DECT) Extensions	Yes, with optional module
Weight	4.0 kg
Humidity	20% to 80% (non-condensing)