1.1 Incoming Call Features
1.1.1 Incoming Trunk Call Features
1.1.1.1 Incoming Trunk Call Features—SUMMARY
Description
Incoming
calls via a trunk (public line) are distributed to their destinations according to one of several distribution
methods.
1. Available Networking Type for Each Card Type
Each trunk port of an optional trunk card or the IPCMPR/IPCEMPR card can be assigned a networking
type: Public, Private, or VPN (Virtual Private Network).
® 3.38 [1-1] Slot—Port Property - T1 Port—
Trunk Property
® 3.44 [1-1] Slot—Port Property - E1 Port—
Trunk Property
® 3.47 [1-1] Slot—Port Property - EM Port— Trunk Property
® 12.2 [10-2] DIL Table & Port Settings—DIL—
Trunk Property
Card Type
Channel/
Protocol Type
Networking Type
Public (DIL/DID/
DDI/MSN)
Private (TIE)
*1
Virtual Private
Network (VPN)
*2
IPCMPR/
IPCEMPR
(V-IPGW)
H.323
ü*
IPCMPR/
IPCEMPR
(V-SIPGW)
SIP
ü*
IP-GW H.323 ü*
ELCOT/LCOT — ü*
DID — ü*
T1 LCOT ü*
GCOT ü*
DID ü*
TIE (E & M)
ü
ü*
OPX (EXTN.)
E1 DR2 ü*
ü
E & M-C
ü
ü*
E & M-P
ü
ü*
E & M —
ü
ü*
14 Feature Guide
1.1.1 Incoming Trunk Call Features
To Next Page
Loading...
