2.6.6 Hot Line
Description
An extension user can set his extension to automatically dial a preprogrammed telephone or extension number
whenever he goes off-hook. This feature is also known as Pickup Dialling.
If the Hot Line feature is set, a dial tone is generated for a specified Waiting time assigned through system
programming when the user goes off-hook. During the Waiting time the user can dial another party, overriding
the Hot Line feature. If no number is dialled, the preprogrammed number will automatically start being dialled.
Conditions
• Capable Telephone
PT, SLT, and PS
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone— Dial—Hot Line
(Pickup Dial) Start (s)
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features— Hot Line (Pickup Dial)
Program Set / Cancel
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 2
→ Pickup Dial Set
→ Pickup Dial No.
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 2
→ Pickup Dial Set
→ Pickup Dial No.
PT Programming Manual References
[204] Hot Line Waiting Time
Feature Manual References
6.1 Capacity of System Resources
Operating Manual References
1.2.2 Easy Dialling
Feature Manual 129
2.6.6 Hot Line
To Next Page
Loading...
