Panasonic KX-NS700 - LED Indication

2.21.3 LED Indication
Description
The LED (Light Emitting Diode) of the Message/Ringer Lamp and following buttons (Line Status Buttons and
Corresponding Extension Status Button) show line conditions with a variety of light patterns.
Line Status Buttons: S-CO, G-CO, L-CO, INTERCOM, ICD Group, PDN
Corresponding Extension Status Button: DSS, SDN
1. Light Pattern of the Message/Ringer Lamp
[IP-PT and DPT]
• Incoming call from a trunk: Red flashing
• Incoming call from another extension: Green flashing
• Message(s) present (no incoming call): Red on
• No message(s) present (no incoming call): Off
[APT]
• Incoming call: Red flashing
• Message(s) present (no incoming call): Red on
• No message(s) present (no incoming call): Off
2. Light Pattern of the Line Status Buttons
Light
Pattern
Line Status Button
Trunk Status
Intercom
Line Status
Incoming
Call
Distribution
Group Line
Status
S-CO G-CO L-CO INTERCOM ICD Group
Off Idle
Green on This extension is using the line.
Slow green
flashing
This extension is holding the line.
Moderate
green
flashing
This extension is holding the line using Exclusive Hold or using the line for an
Unattended Conference.
Rapid green
flashing
Incoming call/
Privacy
Release
Incoming call
Red on Incoming call
for another
extension/
Another
extension is
using the line/
Another
extension has
the line on
Exclusive
Hold.
Other
extensions
are using all
trunks in the
trunk group.
— This
extension is
logged out of
the incoming
call
distribution
group.
Feature Manual 257
2.21.3 LED Indication