This Bluetooth Module is also compatible with KX-DT343/KX-DT346 DPTs.
• Calls made using a Bluetooth wireless headset will not be disconnected immediately when the user
wanders out of range. However, if the Bluetooth wireless headset user remains out of range for a specified
time period, the call will be disconnected.
• The following features cannot be used with an IP-PT:
– XDP
– Digital XDP
– OHCA
• Automatic Rerouting to Secondary PBX
A KX-NT300 series or KX-NT500 series IP-PT can automatically connect to a secondary PBX, when the
primary PBX becomes disconnected. When the primary PBX is connected again, the IP-PT reconnects to
it.
Installation Manual References
4.4 Virtual Cards
PC Programming Manual References
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site—Main— IP Terminal
Registration Mode
9.13 PBX Configuration—[1-1] Configuration—Slot—Card Property—V-IPEXT
9.14 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-IPEXT
Feature Manual 487
5.2.1 IP Proprietary Telephone (IP-PT)
To Next Page
Loading...
