EasyManua.ls Logo

Panasonic KX-NS700 - Page 501

Panasonic KX-NS700
580 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
In an environment where P2P communication between IP extensions and IP trunks is not allowed due to
provider restrictions, set IP Extension - SIP Trunk P2P to disable, or assign different P2P group settings
between callers.
Note
During P2P communication, DTMF signals cannot be detected by the PBX since sound RTP packets are
processed directly between IP extensions and IP trunks. As a result, features that use DTMF detection
(e.g., DISA Call Transfer to Outside User) cannot be used. To use such features, change the settings to
allow for non-P2P calls, to create an environment where DTMF detection is available. Confirm with your
ITSP whether there are services which use DTMF detection and whether P2P communication is possible.
Installation Manual References
4.3.3 DSP Cards
PC Programming Manual References
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site—VoIP-DSP Options
9.10 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPGW—Main— P2P Group
9.10 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPGW—Main— P2P Group Name
9.14 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-IPEXT—Main—
P2P Group
9.14 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-IPEXT—Main— P2P Group Name
9.14 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-IPEXT—Option— IP Codec Priority
9.16 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPEXT—Main— P2P Group
9.16 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPEXT—Main P2P Group Name
9.16 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPEXT—FAX/T.38
9.20 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-UTEXT—Main— P2P Group
9.20 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-UTEXT—Main— P2P Group Name
9.20 PBX Configuration[1-1] ConfigurationSlot—Port Property—V-UTEXT—Option UT Codec Priority
- 1st—UT Codec Priority - 4th
10.9 PBX Configuration[2-9] SystemSystem OptionsOption 8 Extension - Trunk P2P—IP Extension
- SIP Trunk P2P
Feature Manual References
5.2.1 IP Proprietary Telephone (IP-PT)
5.1.2 Group
Feature Manual 501
5.2.3 Peer-to-Peer (P2P) Connection

Table of Contents

Other manuals for Panasonic KX-NS700

Related product manuals