Feature Description & Reference
Automatic Fax Transfer A virtual PS can be used to forward fax calls to a fax machine at
another PBX connected by TIE line.
® 2.16.2 Automatic Fax Transfer
Built-in Simplified Voice
Message
Registering a virtual PS as the first extension of an ICD Group
provides the ICD Group with a dedicated message box that is not
shared with an actual extension.
®2.16.3 Built-in Simplified Voice Message (SVM)
Conditions
• To use this feature, call forwarding to trunks must be enabled through COS programming.
PC Programming Manual References
9.36 PBX Configuration—[1-2] Configuration—Portable Station
PT Programming Manual References
[690] PS Registration
Feature Manual References
2.3.2 Call Forwarding (FWD)
514 Feature Manual
5.2.4 Portable Station (PS) Features
To Next Page
Loading...
