Panasonic KX-TAW848 - Page 96

1.11 Display Proprietary Telephone
96 User Manual
To clear the log information
To call
• The Call Log button light shows the current status as follows:
Off: No incoming call. Or you have already viewed the call log.
Red on: You have missed calls to view.
• If your call is answered by another extension, the caller's information is recorded on the displays
of both your extension and the answering extension.
• You can lock your call log display by using an extension PIN (Personal Identification Number), so
that you can prohibit access to your logged information. Refer to "3.1.2 Settings on the
Programming Mode".
• You can also have a Call Log button for an ICD Group (Incoming Call Distribution Group).
• If a call arrives while you are using the call log, the call log display will be replaced with the caller's
information.
• For a PS user, refer to "Operating Instructions" for PS.
Customizing Your Phone
• 3.1.3 Customizing the Buttons
Create or edit a Call Log button or Call Log for ICD Group button.
Press TRANSFER .
Display PT
While viewing the log information
Press Call Log until
desired party appears.
(Call Log)
Off-hook.
While viewing the log information
Display PT
Press Call Log until
desired party appears.
(Call Log)