1.3 Telephone Features and Operation
Operating Manual 43
1.3.13 Call Waiting Tone
During a conversation, you can be informed of a waiting call with a call waiting tone through the built-in
speaker of your PT or the handset of your SLT. (Default: Enable—Tone)
To set/cancel for intercom calls
To set/cancel for outside calls
1.3.14 Character Entry
You can enter the following characters. The table shows you the characters available for each button.
• To change the tone from a PT, refer to "3.1.2 Personal Programming".
• For information about answering a waiting call, refer to "1.3.12 CALL WAITING FEATURES".
Off-hook. Enter
0
or
1
. On-hook.Enter
731
.
PT/SLT/PS
No tone
Tone
0
1
3 17
C.Tone
OR
Off-hook.
Enter
0
or
1
.
On-hook.
PT/SLT/PS
No tone
Tone
0
1
OR
Enter
732
.
3 27
C.Tone
OR