1.3 Telephone Features and Operation
Operating Manual 79
1.3.37 Message Waiting
For a caller
To leave a message waiting indication
• The Hurry-up button light shows the current status as follows:
Off: No waiting call.
Red on: Some calls are waiting.
Flashing red: The number of calls exceeds the manual queue redirection level.
• For information about other ICD group features, refer to "1.3.34 ICD GROUP FEATURES".
Customizing Your Phone
• 3.1.4 Customizing the Buttons
Create or edit a Hurry-up button.
For a caller
When the called extension is busy or does not answer your call, you
can leave a notification so that the called party may call you back.
For a called extension
As a message receiver, the Message button light or Message/
Ringer Lamp lets you know that a call has been received. If you
receive notification, you can call back the caller by a simple
operation.
PT/SLT/PS
Press MESSAGE
or enter 4.
On-hook.
When the called extension is busy or does not answer
4
C.Tone
OR
To Next Page
Loading...
